Hejsa
Er der nogen som lige ligger inde med en dansk eller engelsk udgave af Salifert vejledningen for test sæt KH/ALK profi test?
Fatter ikke den tyske forklaring
"MÅNEDENS AKVARIE" Se denne måneds akvarie HER.
KH/ALK test sæt på DK
Jeg skal prøve, 
1. Add with the 5ml syringe 4 ml. of water in the test vial. For a lower resolution and more test per kit add 2 instead of 4 ml.
2. Shake the KH-Ind dropping bottle a few times and add 2 drops in the test vial (1 drop for the low res. mode)
3. Put the plastic tip firmly on the 1 ml. syringe. And draw into the syringe the KH reagent till the lower end of the black part of the piston is excactly at the 1.00 ml.mark. There will be some air present just below the piston. This is the air which was present between the end of the plastic tip and the piston. This will not influence the test result.
4. Add dropwise with the 1 ml. syringe the KH reagent to the water in the test tube. swirl after each drop a second or two. Continue with this until the color changes from blue/green to a orange-red or pink color.
5. Hold the syringe with the tip facing upward and read the position of the black piston. The syringe has graduations of 0.01 ml. Read the KH or alkalinity value from the table or calculate as follows.............
If you have chosen the lower res. multiply the calculated result by 2.
Håber det kan bruges.
1. Add with the 5ml syringe 4 ml. of water in the test vial. For a lower resolution and more test per kit add 2 instead of 4 ml.
2. Shake the KH-Ind dropping bottle a few times and add 2 drops in the test vial (1 drop for the low res. mode)
3. Put the plastic tip firmly on the 1 ml. syringe. And draw into the syringe the KH reagent till the lower end of the black part of the piston is excactly at the 1.00 ml.mark. There will be some air present just below the piston. This is the air which was present between the end of the plastic tip and the piston. This will not influence the test result.
4. Add dropwise with the 1 ml. syringe the KH reagent to the water in the test tube. swirl after each drop a second or two. Continue with this until the color changes from blue/green to a orange-red or pink color.
5. Hold the syringe with the tip facing upward and read the position of the black piston. The syringe has graduations of 0.01 ml. Read the KH or alkalinity value from the table or calculate as follows.............
If you have chosen the lower res. multiply the calculated result by 2.
Håber det kan bruges.
